#Alligator clips for conveyor belts install
#Alligator clips for conveyor belts pro

But solid-plate fasteners are more rigid and durable. This creates greater surface area to grip and gives smaller pulleys more traction. Hinged fasteners allow the lacing to pivot or bend around the pulley. Smaller pulleys can only drive lighter-duty fasteners. Larger pulleys are required to propel larger, heavier solid-plate fasteners. This figure will dictate which lacing options are available to you. Add 25 percent for wing (self-cleaning) pulleys. Pulley diameter – Find the pulley on your conveyor around which the belt wraps 90 degrees or more, and measure its diameter.Belts used in heavier duty applications need more robust hardware attached with bolts or rivets. Belts with light tension ratings of 160 pounds per inch of belt width can be laced with wire hooks, bars, stapled plates, or plastic hinges.

Belts used to carry heavier weights generally need higher tension to overcome friction and resistance in order to keep the belt from sagging into the conveyor’s components. Tension and belt rating – Limit the field further by taking note of the tension rating assigned by the belt’s manufacturer.Conveyor belt fasteners suited for this final thickness remain contenders for final selection. If you’re going to skive the belt – removing a section of the cover to give the fastener a better grip on the belt’s carcass – remember to deduct the skiving depth from the thickness determination. Friction with pulleys and conveyed materials cause compression and wear to both the top and bottom surfaces of the belt, reducing its thickness. Do not simply assume the belt remains at the same thickness it was when you bought it. Thickness – measure the belt’s thickness at the splice location.If you need to replace the fastener, examine your conveyor system and relay the following information to Accurate Industrial: Your belt’s characteristics will determine which lacing fastener should be used. Accurate Industrial carries several conveyor belt fastener options such as stainless steel, high-tensile steel, plastic, and Megalloy. Selecting the correct fastener, squaring the belt, and correctly installing the lacing are the keys to smooth, safe performance and maximum productivity. Specific types of belts are fabricated to accept certain types of fasteners. To make the right fastener choice for lacing new conveyor belts or repairing of existing belts, consider the belt’s material and application.

Unlike endless splicing, laced conveyor belts are fitted with mechanical conveyor belt fasteners to form the continuous loop required for operation.

It is a durable, shop-use lacer for hooks of all sizes.Many manufacturing, processing and packaging applications call for laced conveyor belts that can be disconnected and removed for maintenance, repair, and replacement. The most economical production lacing tool. Suitable for both shop and production use.Laces entire lacer width with one simple press of the foot pedal.No better choice for users who insist on speed.

#Alligator clips for conveyor belts pro

Includes all Pro 6000 features except the heated jaws Electric Hydraulic Lacer Electronic controls permit users to program heat, pressure, and jaw closure times for repeatability in lacing procedures. Lacer pressure can be adjusted up to 7350 PSI (500 bar), jaw closure hold time up to 10 seconds, and heated jaws up to 390˚ F (200˚ C). Longer combs allow the user to first load the fasteners into the comb, then lace up to 12” (300 mm) at a time, sliding the comb to the next section to be laced. Lace 14” (350 mm) at a time, with combs available in lengths up to 60” (1500 mm). The jaws can be heated to ease hook penetration and to allow the belt cover to slightly flow, resulting in a splice with an extremely low profile.

#Alligator clips for conveyor belts install

Users of the hydraulic Pro 6000 install the ultimate splice. Belt Positioners, Trackers, and Trainers.Connectivity Dashboard for the Novitool® Aero® Splice Press.